ABREX 500 Wear Resistance Steel Sheet
ABREX 500 steels are the most generally utilized of the wear safe evaluations. ABREX 500 shows a fantastic consolidation of high resistance to effect, workability, weld capacity and resistance to abrasion. ABREX 400 has around 3 times the abrasion resistance of normal steel plate and helps draw out the administration life of mechanical parts.
The Abrex 400 and Abrex 500 series(Previously named as Sumihard 400 and 500) is the wear plate series from Nippon Sumitomo Steel Metal Corporation, Japan. The use of abrasion resistant ABREX steel plate markedly reduces the weight of structural members exposed to severe abrasive conditions. Compared with regular steel, ABREX steel plate reduces structural weight and delivers economic merits. Adoption of high-performance abrasion resistant ABREX will prolong the service life of machinery and components.
WixSteel import and sell Abrex 500 steel plate for many years, currently, China own grade abrasion resistance steel plate quality is good too, not such good compare with Abrex 500, but price is competitive, some flexiable environment can use China abrasion resistance steel instead, such as NM360 etc.
Technical conditions of Abrex 500 Abrasion Resistant Steel Plates
- Ultrasonic tested as per SA 578 or any other as per requirement
- MTC acc to EN 10204 / 3.2
- Charpy Impact tested at -20 / - 46 DegC.
- Furnace Normalised
- BQ Plates with IBR form IV
ABREX Specification by Type and Designation:
(Tips: All table can be scroll right or left to see whole table on phone screen)
Type | Grades | Plate Thickness | Brinell Hardness (HBW)*1 | Charpy Impact Test (L Direction)*2 | ||
t (mm) | Aiming | Range | Test Temperature (°) | Absorbed Energy (j) | ||
Standard Type | ABREX 400 | 6(4.0) ~ 100 | 400 | 360 ~ 440 | - | - |
ABREX 450 | 6(4.5) ~ 100 | 450 | 410 ~ 490 | - | - | |
ABREX 500 | 6(4.5) ~ 100 | 500 | 450 ~ 550 | - | - | |
ABREX 600 | 6 ~ 25 | 600 | 550 ~ 650 | - | - | |
Extra Tough Type | ABREX 400LT | 6 ~ 60 | 400 | 360 ~ 440 | -40 | ≥27 |
ABREX 450LT | 6 ~ 25 | 450 | 410 ~ 490 | -40 | ≥27 | |
ABREX 500LT | 6 ~ 25 | 500 | 450 ~ 550 | -40 | ≥21 |
ABREX 400 Chemical Properties:
Type | Grades | Chemical Composition (%)*1 | ||||||||||
C | Si | Mn | P | S | Ni | Cr | Mo | B | PCM (t:thickness)*2 | |||
≤t25 | t>25 | |||||||||||
Standard Type | ABREX | ≤0.21 | ≤0.70 | ≤2.00 | ≤0.025 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.30 | ≤0.35 |
ABREX | ≤0.23 | ≤0.70 | ≤2.00 | ≤0.025 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.36 | ≤0.36 | |
ABREX | ≤0.35 | ≤0.70 | ≤2.00 | ≤0.015 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.42 | ≤0.42 | |
ABREX | ≤0.45 | ≤0.70 | ≤2.00 | ≤0.015 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.54 | - | |
Extra Tough Type | ABREX 400LT | ≤0.21 | ≤1.2 | ≤2.00 | ≤0.010 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.30 | ≤0.35 |
ABREX 450LT | ≤0.28 | ≤1.2 | ≤2.00 | ≤0.010 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.36 | - | |
ABREX 500LT | ≤0.35 | ≤1.2 | ≤2.00 | ≤0.010 | ≤1.00 | ≤1.20 | ≤0.60 | ≤0.60 | ≤0.005 | ≤0.42 | - |
ABREX 400 Mechanical Properties:
Type | Grades | Thick-ness (mm) | Brinell Hardness (HBW) | Mechanical Properties | ||||||
Yield Strength (N/mm2) | Tensile Strength (N/mm2) | Bend Radius (t:thickn-ess) | Angle | Result | Tempera-ture () | Absored Energy (j) | ||||
Standard Type | ABREX | 25 | 414, 417, 416 | 1075 | 1322 | 3t | No Cracking | 0 | 73 | |
ABREX | 25 | 458, 453, 459 | 1192 | 1469 | 3t | No Cracking | 0 | 57 | ||
ABREX | 25 | 513, 509, 520 | 1373 | 1552 | 3t | No Cracking | 0 | 43 | ||
ABREX | 25 | 611, 606, 601 | 1568 | 2058 | - | - | - | 0 | 13 | |
Extra Tough Type | ABREX 400LT | 60 | 390, 393, 393 | 1162 | 1207 | 3t | 180 | No Cracking | -40 | 63 |
ABREX 450LT | 25 | 464, 464, 467 | 1237 | 1560 | 3t | 180 | No Cracking | -40 | 38 | |
ABREX 500LT | 25 | 495, 492, 495 | 1198 | 1680 | 3t | 180 | No Cracking | -40 | 38 | |
Test Conditions | JIS Z2243 Surface | JIS Np. 5 T Direction | JIS No. 1T Direction | 2mmV Notch L Direction |