ACP 5080RS Aluminum Alloy Plate

Machined and sawed Aluminium Cast Material for the Solar, Semiconductor and Display Industry

Developed for innovative, high-end industries like the Electronics, Semiconductor, Solar, and Display Panel industries, ACP 5080S and ACP 5080RS provide material solutions for the most challenging and critical applications.

Through decades of practical application experience, continuous material research, development, and testing, ACP 5080S and ACP 5080RS provide good mechanical and physical properties as compared with similar competitors’ cast and rolled aluminum plates.

Material excellence and superiority is achieved through the proprietary smelting, manufacturing, processing and handling procedures and specifications employed in the production of this grade.

The material ACP 5080S / ACP 5080RS provides material solutions for the most challenging and critical applications of these market segments and is already approved by many industry leaders worldwide.

ACP 5080RS Specifications

Chemical Composition

EN AW 5083 (AlMg4.5Mn0.7) acc. to DIN EN 573-3 / 3.3547

Material Properties

Machinability excellent

Weldability (TIG, MIG) good (with S Al 5183)

Anodising Properties good (not decorative)

Polishing excellent

Corrosion Resistance excellent

Eroding Properties good

High Speed Cutting Properties excellent

Electrical Discharge Machining (EDM) good

Etching good

Cryogenic excellent

Diffusion Tightness excellent

Typical Mechanical Properties

Tensile Strength Rm 240-290 MPa (N/mm2)

0.2 % Yield Strength Rp 0.2 110-130 MPa (N/mm2)

Elongation A 5 % 15

Brinell Hardness HB 70

Typical Physical Properties

Density 96* 10-3 lb/in3

Thermal Conductivity 63- 81 Btu/(ft* h˚F)

Electrical Conductivity ~35% IACS

Modulus of Elasticity 10.3* 103ksi

Coefficient of Thermal Expansion 13.5* 10-6/˚F

Thickness Range & Sizes

Thickness between 0.3150“ and 22.44“ . Plates and pre-cut sizes in every dimension depending on the block formats.

Thickness max.Width* Length*

22.44“ x 51.97“ x 118.90“

22.44“ x 61.81“ x 144.49“

22.44“ x 85.04“ x 157.48“

> 85.04“ Width: Please see the product information for ACP 5080 GIANT / ACP 5080R GIANT

Tolerances

Surface sawn on all sides

Tolerance in Thickness +0.1181“/- 0” (closer on request)

Tolerance (W/L) for Cut Pieces +0.1181“/- 0” (closer on request)

Special Features

Especially homogenized / Stress relieved / Ultrasonic tested / Reduced micro-porosity / Tested continuously