55CrMnA Spring Steel Bar
55CrMnA spring steel has higher strength, plasticity and toughness, better hardenability, lower overheat sensitivity than manganese steel, lower decarburization tendency than silico-manganese steel, and greater temper brittleness. The outstanding advantage is that it has good hardenability. In addition, thermal processing performance, comprehensive mechanical properties, and decarburization resistance are also good. It is also used in the vehicle and tractor industries to make leaf springs with heavier loads and greater stress and coil springs with larger diameters.
Chemical Composition:
C | Si | Mn | S | P | Cr | Ni | Cu | V |
---|---|---|---|---|---|---|---|---|
0.52~0.60 | 0.17~0.37 | 0.65~0.95 | ≤0.030 | 0.030 | 0.65~0.95 | ≤0.35 | ≤0.25 | 0.10~0.20 |
Mechanical properties:
Tensile Strength σb (MPa): | Yield Strength σ0.2 (MPa): | Elongation δ5 (%): | Section shrinkage ψ (%): | Hardness: |
---|---|---|---|---|
≥ 1225 (125) | ≥1080 (110) | ≥ 9 | ≥20 | Hot rolled: ≤ 321HB Cold pull + heat treatment: ≤ 321 HB |
Heat treatment specifications:
quenching 830 ~ 860 ℃, oil cooling; tempering 460 ~ 510 ℃.
Products Size Range:
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |