6009 Aluminum Alloy Plate

 

6009 aluminum alloy is a wrought alloy with good corrosion resistance. The following datasheet will provide more details about aluminium/aluminum 6009 alloy.

 

Chemical Composition:

 

Chemical Elements:MetricEnglish
Aluminum, Al 95.7 - 98.7 %95.7 - 98.7 %
Chromium, Cr <= 0.10 %<= 0.10 %
Copper, Cu 0.15 - 0.60 %0.15 - 0.60 %
Iron, Fe <= 0.50 %<= 0.50 %
Magnesium, Mg 0.40 - 0.80 %0.40 - 0.80 %
Manganese, Mn 0.20 - 0.80 %0.20 - 0.80 %
Other, each <= 0.05 %<= 0.05 %
Other, total <= 0.15 %<= 0.15 %
Silicon, Si 0.60 - 1.0 %0.60 - 1.0 %
Titanium, Ti <= 0.10 %<= 0.10 %
Zinc, Zn <= 0.25 %<= 0.25 %

 

Mechanical Properties:

 
Mechanical PropertiesMetricImperial
Tensile strength230 MPa33400 psi
Yield strength125 MPa18100 psi
Elongation at break25%25%
Elastic modulus69 GPa10000 ksi
Shear modulus26 GPa3770 ksi
Poisson’s ratio0.330.33
Hardness, Brinell6262
Hardness, Knoop (converted from Brinell hardness value)8383
Hardness, Vickers (converted from Brinell hardness value)7070
 

    Thermal Properties:

     
    Thermal PropertiesMetricEnglishComments
    CTE, linear21.6 µm/m-°C
    @Temperature -50.0 - 20.0 °C    		12.0 µin/in-°F
    @Temperature -58.0 - 68.0 °F    		 
     23.4 µm/m-°C
    @Temperature 20.0 - 100 °C    		13.0 µin/in-°F
    @Temperature 68.0 - 212 °F    		 
     23.6 µm/m-°C
    @Temperature 20.0 - 100 °C    		13.1 µin/in-°F
    @Temperature 68.0 - 212 °F    		 
     24.3 µm/m-°C
    @Temperature 20.0 - 200 °C    		13.5 µin/in-°F
    @Temperature 68.0 - 392 °F    		 
     25.2 µm/m-°C
    @Temperature 20.0 - 300 °C    		14.0 µin/in-°F
    @Temperature 68.0 - 572 °F    		 
    Specific Heat Capacity 0.890 J/g-°C0.213 BTU/lb-°FEstimated from trends in similar Al alloys.
    Thermal Conductivity 180 W/m-K1250 BTU-in/hr-ft²-°F 
    Melting Point 588 - 650 °C1090 - 1200 °F 
    Solidus 588 °C1090 °F 
    Liquidus 650 °C1200 °F 

     


    Related 6000 Series Aluminum Alloy Materials